DESIGN MATTERS

The RX200 is a 200 MHz wide-band, compact, battery powered ENG receiver. It has a tunable tracking front end filter for receiving any frequency in any block from 20 through 26, or 512 – 698 MHz, all while still filtering out unwanted RF.

CONNECTIVITY

RX200 can output AES digital audio or analog audio at -35dB mic level, -10dB consumer level, or 0dB line level on a single TA5 connector. It’s also capable of receiving and outputting the embedded SMPTE timecode on a BNC connector also on mic, line or consumer levels, so no matter what the camera is all bases are covered.

CHANNEL COUNT

The RX200 receives up to two channels of audio from one transmitter. You can use it with any UHF transmitter we make, but it’s most often paired with the TRXCL3 since it’s so small and light and has dedicated audio and timecode outputs. 

RF PERFORMANCE

As mentioned above, the RX200 has an automatic tracking front end filter, so you can receive on any frequency in any block from 20 through 26 (512-698MHz) with impressive range. Here’s how that works – the filter allows signals within the 35 MHz tunable window into the receiver while blocking the interfering high-level signals outside this window. 

HALF OF YOUR CAMERA LINK

The RX200 / TRXCL3 Camera Link combo is a great solution for sending two channels of 100% digital audio with embedded SMPTE timecode from bag to camera. Small and light-weight with Zaxcom’s patented side-mounted LED’s, the RX200 is easy to mount on any camera – from small format DSLR to a full size rig.

POWER

The ultra compact RX200 is not only small, but incredibly flexible – it can be powered from an external power source or internally via 4 x AA batteries for up to 12 hours so you can use this with any camera big or small. To top it off it’s extremely power efficient drawing only 140 mA @ 12 VDC.

FREQUENCY RANGE

The RX200 is wide-band and covers all frequency blocks from 20 through 26 (512-698 MHz).

Specifications
Capacity SPECIFICATIONS
Receiver
Receiver RF Channels
1
Diversity method
antenna switching
RF Modulation
proprietary digital method
RF Frequency Range
518 to 698 MHz
RF Frequency Step
100 KHz
RF Signal Bandwidth
100 KHz in ZHD 96, 200 KHz in XR, mono, and stereo modes
Channel Separation
500 KHz
Sensitivity
-114 dBm
Antenna Connector
50-ohm SMA female X 2
Receiver Audio – Analog Output X 2
Dynamic Range
116 dB
Distortion
0.002%
Frequency Range
20Hz to 16kHz
DAC Bit-depth
24 bits
Connector
TA-5M
Audio Output
Active analog balanced
Audio Output Level
-35dBm (mic), -10dBm (consumer) or 0dBm (line)
Receiver Audio – Digital Output
Signal Format
AES Balanced
AES dynamic range
123dB
Frequency Range
20Hz to 16kHz
AES3 balanced output
32 KHz
Audio Output Connector
TA-5M
Timecode
Timecode output connector
BNC
Timecode output level
.01VPP, .2VPP, .5VVP, .9VPP, 1.5VPP
Time code output rate
23.98, 24, 25, 29.97 ND, 29.97 DF, 30
Power
External Power
6 to 18 VDC (140mA @ 12VDC)
Power Connector
Switchcraft 760k
Internal Power
4 AA Batteries
Li-Ion Battery Life
Up to 12 hours
NiMH Battery Life
Up to 8.5 hours
Alkaline Battery life
Up to 7 hours
Misc.
Serial Control Port
RS422
Weight
7.7 oz (without internal batteries)
Dimensions
1.0″ x 3.5″ x 3.5″ (25mm x 89mm x 89mm)
Display
Graphic White OLED Panel

Zaxcom - RX200 Wideband 2 Channel Receiver

  • Brand: Zaxcom
  • Product Code: RX200
  • $1,995.00


Related Products

Zaxcom - TRXCL5 - Camera Link

Zaxcom - TRXCL5 - Camera Link

DESIGN MATTERS Deliver pristine audio quality with the TRXCL5 wide-band camera link transmitter f..

$2,495.00