INTELLIGENT DESIGN
The RX-12R is a completely reimagined rack-mountable receiver ideal for sound challenges in studio and network applications. Its ergonomic design takes up only one-and-a-half rack spaces in height.
POWERFUL RECEPTION
As a wide-band receiver, its full tuning range is 512-698 MHz and features a 35 MHz tracking front end filter to eliminate interference from unwanted radio frequency (RF).
The RX-12R provides RF amplification and both antenna and power distribution for up to 6 Zaxcom QRX212 modules inside the RX-12R. Placing the QRX212 module in single-channel mode will deliver 6 channels of true diversity audio and dual-channel mode allows for up to 12 channels of audio when demand is less critical.
All QRX212 modules are hot-swappable and can be added or removed at any time, making the RX-12R ideal for rental companies where receiver requirements can change on a daily basis.
FULLY DIGITAL
The RX-12R receives a 100% digital signal that is fully encrypted resulting in audio quality far superior to any analog system. Additionally, it’s compatible with all Zaxcom modulations and transmitters.
EASY CONTROL
A bright, full-color LCD displays the menu while a built-in frequency scanner and Auto-Pick software eliminates the guesswork and can coordinate and choose the best frequencies with a push of a button.
CONNECTIVITY
6 XLR analog outputs and two DB25 connectors configure 12 analog or 12 digital signals. An antenna in and RF loop through provide support to daisy chain up to three RX-12R receivers to one set of antennas.
You can monitor the internal audio via headphones and auto-switching 12V redundant DC input supplies power.
ADVANCED FEATURES
When paired with a Zaxcom recorder, the RX-12R can re-frequency transmitters to match the RX-12R with a touch of a button via ZaxNet™.
| Specifications | |
| Capacity | SPECIFICATIONS Output Analog Audio Output Balanced 0dB @ -20 dBFS (2-channel receiver) Analog Audio Output Connectors 6 x Male XLR Outputs Digital Audio Output Connectors 2 x DB25 Headphone Output 1 x 3.5 mm Digital I/O Connectors 1 x USB / 1 x RS422 Receiver RF Input Connectors 2 BNC RF Output Connectors 2 BNC RF Impedance 50 ohm RF Gain Input / Output 0 dB RF Amp Noise Figure .5 dB RF Amp IP3 +30 dB input RF Filter Band Pass 35 MHz RF Tuning Range 512 – 698 MHz MRX414 Module Receivers Per Module 4 Receiver Modulation Zaxcom Proprietary Digital MRX414-L Tuning Range 512 – 614 MHz MRX414-M Tuning Range 536 – 652 MHz MRX414-H Tuning Range 596 – 698 MHz Power Consumption 300 ma @ 12 VDC Size 5" x 3" x .8" (L x W x H) Weight 7oz MRX214 Module Receivers Per Module 2 Receiver Modulation Zaxcom Proprietary Digital MRX214-L Tuning Range 512 – 614 MHz MRX214-M Tuning Range 536 – 652 MHz MRX214-H Tuning Range 596 – 698 MHz Power Consumption 160 mA @ 13 VDC Size 5" x 3" x .8" (L x W x H) Weight 7oz QRX212 Module Receivers Per Module 2 Receiver Modulation Zaxcom Proprietary Digital Tuning Range 512 – 698 MHz Power Consumption 300 ma @ 12 VDC Size 5" x 3" x .8" (L x W x H) Misc IFB200 Interface Switchcraft TA5-M Power 8 VDC to 18 VDC (2 amps w/6 x QRX212 modules) Power Type Dual input auto switching Power Connectors 2 x Hirose HR10A-7P-4P LCD Screen TFT daylight readable color LCD Size 2.2" diagonal Size 19" x 10.2" x 2.325" (L x W X H) Weight 7.6 lbs (loaded w/ 6 x QRX212 receiver modules) |
Related Products
Zaxcom - RX-12 Digital Wireless Receiver
INTELLIGENT DESIGNThe RX-12 is a one stop, 6 slot, receiver solution for your bag or cart. It can re..
$3,095.00
Zaxcom - RX-8
DESIGNThe RX-8 is an extremely small 8-channel receiver interface for your bag or cart. Accepting au..
$2,595.00