Features

• Fits camera “slots,” Lectrosonics Duopack adapter and Octopack multicoupler, and operates stand-alone with various adapters
• 76 MHz tuning range in 100 kHz or 25 kHz steps for up to 3072 frequencies (bands A1, B1, C1)
• 941 band offers 695 frequencies over 19 MHz tuning range with 25 kHz steps
• Dual receiver design for two channels with phase switched diversity or single channel with ratio diversity operation
• Digital Hybrid Wireless® with compatibility modes for use with other transmitters
• Tracking front-end filters for high performance in tough RF environments
• LCD with RF spectrum scanning
• SmartSquelchTM DSP-controlled, noise based filtering and squelch
• DSP-based pilot tone for squelch control
• IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)
• SmartTune operation for quick and confident frequency selection

The SRc5P and SRc consists of two separate receivers built into a single, ultra compact housing with adapters for video camera receiver slots and for stand-alone use. Digital Hybrid Wireless® technology provides superb, compandor-free audio quality and compatibility with other wireless systems. The RF performance is extremely stable over a very wide temperature range, making the receiver perfectly suited to the rough environmental conditions found in field production.

DSP compatibility modes allow the receiver to be used with a variety of Lectrosonics systems, other brands of wireless systems and with Lectrosonics IFB transmitters.

Included Accessories

• 1 - Adjustment Tool (Part# 35679)
• 2 - Antennas (Part #AMJ-XX)
• 1 - Quickstart Guide

Specifications

Operating Frequencies: Operating Frequencies: Band A1: 470.100 - 537.575 MHz Band B1: 537.600 - 614.375 MHz Band B2: 563.200 - 639.975 MHz Block 606: 606.000 - 631.500 MHz Band C1: 614.400 - 691.175 MHz Band C2: 640.000 - 713.900 MHz/716.775 MHz selectable

Frequency selection steps: Selectable; 100 kHz or 25 kHz

Receiver Type: Dual conversion, superheterodyne

IF Frequencies: Ch.1: 248.450 MHz and 350.000 kHz Ch. 2: 243.950 MHz and 250.000 kHz

Frequency Stability: ±0.001%

Front end bandwidth: 20 MHz @ -3 dB Sensitivity 20 dB SINAD: 1.0 uV (-107 dBm), A weighted 60 dB Quieting: 2.2 uV (-100 dBm), A weighted Squelch quieting: Greater than 100 dB typical

AM rejection: Greater than 60 dB, 4 uV to 1 Volt

Modulation acceptance: 85 kHz

Image and spurious rejection: 85 dB Third order intercept: 0 dBm

Diversity method: SmartDiversityTM phased antenna combining or Ratio Diversity using both receivers for a single audio channel

FM Detector: Digital Pulse Counting Detector operating at 250 and 350 kHz

RF spectrum analyzer: Coarse and fine scanning modes for RF spectrum site survey

Antenna inputs: 50 Ohm; SMA female connectors Audio output connectors: • Interchangeable D connector adapters for camera slot interfaces • Dual TA3 male (mini XLR) balanced output adapter • Balanced output adapter with fixed cables

Front panel audio output (5P model): Control panel TA5M with two balanced outputs

Audio output level: Adjustable -50 to +5 dBu in 1 dB steps; unbalanced output is 6 dB lower

Audio channel crosstalk: -80 dB or better

Front Panel Controls and Indicators: • Sealed panel with membrane switches • LCD monitors pilot tone; antenna phase, receiver battery level; transmitter battery status; audio level, RF level Audio test tone: 1 kHz, -50 dBu to +5 dBu output (bal); 1% THD