Browse brands

Zaxcom - ZMT3-Flex

Zaxcom - ZMT3-Flex
Zaxcom - ZMT3-Flex
Product Code: ZMT3-Flex
Sales SKU: ZAX ZMT3-Flex
$2,495.00

Available Options


* Zaxcom Blocks 3.5 or 3.6:

Qty:   - OR - Add to Wish List

The ZMT3- Flex is a tough wireless designed for tough demands. Deliver pristine audio quality with a bendable wireless transmitter designed to capture the on field experience of professional sports. Weighing only 3oz, the ZMT3-Flex is encased in a soft yet durable silicon rubber that allows the transmitter to bend and flex, providing an elevated level of safety for the professional sports player.

The ZMT3-Flex works with either a single mono or dual lavalier microphones in stereo via two microdot input connectors.

The ZMT3-Flex transmits using 100% digital modulation resulting in audio that's fully encrypted. Digital encryption is the only way to keep all audio transmission private. A digital transmission also provides audio quality far superior to an analog system.Audio can be recorded internally to a microSD card using the highly reliable lossless MARF (Mobile Audio Recording Format) which eliminates file corruption common to recordings due to dead battery or early card removal.

The ZMT3-Flex provides a 128 dB dynamic range in mono and 108 dB in stereo with no limiting or compression distortion. External audio and battery status levels are seen on the OLED or at the receiver. Equipped with ZaxNet™, you can remotely change the frequency, pre-amp gain, output power or place the internal recorder in record, playback and stop modes.

The ZMT3-Flex can be ordered in one of two configurations:
ZMT3.5 - covering blocks 20 through 23 (512-614 MHz)
ZMT3.6 - covering blocks 23 through 26 (596 – 698 MHz)

 

Transmitter

RF Modulation

Proprietary Digital Method

ZMT3.5-Flex RF Frequency Range

512 - 614 MHz

ZMT3.6-Flex RF Frequency Range

596 - 698 MHz

RF Frequency Step

100 KHz

RF Bandwidth in ZHD48 mode

50 KHz

RF Bandwidth in ZHD96 mode

100 KHz

RF Bandwidthin XR mode

200 KHz

Channel Separation in ZHD48 mode

as close as 100 KHz (receiver dependent)

Channel Separation in ZHD96 mode

as close as 200 KHz

Channel Separation in XR mode

400 KHz

Antenna Connector

50 Ω SSMA Female

Emission Designator

180 KV2E, 100 KV2E, 50 KV2E

FCC Part

74.861


Transmitter Audio

Dynamic Range Mono Mode

128 dB

Dynamic Range Stereo Mode

108 dB

Distortion

0.002%

Frequency Response

Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz

High Pass Filter

Off or 30 to 220 Hz, Steps: 10 (6 dB Per Octave)

Mic Power

3.3 VDC

Mic Connector

Two Microdot

Input Range

-60 to -30 dBu

Mic Impedance

6.8 k Ω

ADC Bit-Depth

24 Bits

ADC Sampling-Rate

48 kHz


Timecode Reader / Generator

Clock Accuracy

1.54PPM (1 Frame Out in 6 Hours)

Timecode Type

SMPTE

Timecode Frame Rates

23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF

 


Internal Recording

Media

MicroSD Card (Flash Memory)

File Format

.ZAX / Converts to BWAV or MP3


2.4 GHz Receiver

RF Frequency Range

2.403 to 2.475 GHz

RF Modulation

Digital Spread Spectrum

RF Frequency Step

0.001 GHz (1 MHz)

RF Bandwidth

1 MHz

Channel Separation

2 MHz

Sensitivity

-96 dBm


Physical

Weight

3 oz with Battery

Dimensions

(H x W x D)

4.8” x 1.7” x .4”

Display

Graphic OLED


Power

Power Output

25 / 50 / 75 mW - Software Selectable

Battery Type

Li Ion 1300mAH

Battery Life

Up to 6 Hours with 24 Hours of Standby

Copyright © 2019 Audio Department.

Web development byCCSINTERACTIVE .