Browse brands

DPA - 4071 Omnidirectional, Low-Cut, Presence Boost

DPA - 4071 Omnidirectional, Low-Cut, Presence Boost
Product Code: 4071-FM, 4071-BM, 4071-WM
Sales SKU: DPA 4071-FM, DPA 4071-BM, DPA 4071-WM
$469.95

Available Options


* Color:

* Connection:

* DPA Accessories:

Qty:   - OR - Add to Wish List

An outstanding speech and vocal mic, the 4071 will make your voice be heard with clarity. Use it for all ENG/EFP and even applications which require small microphones that are resistant to moisture, extreme temperature change and humidity.

When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut has been incorporated in the 4071 capsule so the built-in pre amp (and the wireless system) will have much larger headroom. Furthermore, it removes distant rumbling from cars, trains, airplanes, etc.

Another and equally important consideration is that when placing a microphone on the body, espcially on the chest, the frequency range of the consonants is damped, resulting in poor intelligibility. The 4071 has a built-in boost to compensate for this loss. Especially for ENG work the 4071 is perfect because almost no ENG field mixer leaves any possibility for a compensation of this kind.

If you are purchasing this lav with a TA5 or Lemo connector, we will modify the mic in house, and will take 7-10 days to ship.  If you order it pigtailed (unterminated), or with a microdot connector, it will ship immediately if in stock.  When ordering with the microdot connector, be sure you order the correct DPA microdot adapter to interface with your transmitter or sound system. 

* This lav is not recommended for Zaxcom.  We recommend the DPA 4063 (built for operating with a lower supply voltage) for Zaxcom transmitters.


DPA miniature mic nomenclature guide:

4060 - High Sensitivity
4061 - Low Sensitivity
4062 - Extra Low Sensitivity
4063 - Low Sensitivity Low DC (for Zaxcom transmitters)
4071 - Low Cut, Presence Boost

 

 

Directional characteristics

Omnidirectional

Principle of operation

Pressure

Cartridge type

Pre-polarized condenser element with vertical diaphragm

Frequency Range

100 Hz - 15 kHz with typ. 5 dB soft boost at 4 - 6 kHz

Sensitivity, nominal, ±3 dB at 1 kHz

6 mV/Pa; -44 dB re. 1 V/Pa

Equivalent noise level A-weighted

Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A)

Equiv. noise level ITU-R BS.468-4

Typ. 38 dB (max. 40 dB)

S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL)

68 dB(A)

Total harmonic distortion (THD)

< 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine

Dynamic range

Typ. 97 dB

Max. SPL, peak before clipping

144 dB

Output impedance

30 - 40 ohm

Cable drive capability

Up to 300 m (984 ft)

 

Power Supply

 

For wireless systems

Min. 3 V - max. 50 V through DPA adapter

With DAD6001-BC/DAD6024/DAD4099

48 V phantom power ±4 V for full performance

Connector

MicroDot

Color

Black, beige, brown or white

Polarity

Positively increasing sound pressure produces positive going voltage on MicroDot pin

Operating temperature range

-40 °C to 45 °C (-40 °F to 113 °F)

Relative Humidity (RH)

Up to 90%

 

Dimensions (Diameter x Length)

 

Microphone

0.20 x .67 in (5.4 x 17.0 mm)

Cable

0.06 in x 5.9 ft (1.6 mm x 1.8 m)

Weight

0.32 oz (9.0 g) incl. cable and MicroDot connector

 

Copyright © 2018 Audio Department.

Web development byCCSINTERACTIVE .