The DPA 4060 is acoustically identical with the 4061, 4062, and 4063 with a higher sensitivity for lower sound pressure levels. Offering great detail and resolution, the 4060 has a super low noise floor and a neutral sonic character with a transparent natural sound. Excellent for speech and vocals, the DPA miniatures are used by musicals and theaters worldwide. They are also great live and studio microphones for acoustic string instruments.

Two grids are supplied (one high boost and one soft boost), and by changing these grids you can acoustically modify the microphone according to placement (chest, head etc.) With a wide range of MicroDot adapters, you can use DPA miniature microphones with all professional wireless systems plus 48v phantom power.

EXPERIENCE THE SOUND OF CORE BY DPA

CORE by DPA is a powerful new technology at the heart of our d:fine™, d:screet™ and now our d:vote™ series of miniature microphones. We’ve minimized distortion across the entire dynamic range. You will experience increased audio clarity and openness.

CORE by DPA is available for select models of d:screet™ Miniature Microphones and d:fine™ Headset Microphones Series and d:vote™ Instrument Microphones.

CORE by DPA makes our miniature microphones even better.

• CORE by DPA minimizes distortion

• CORE by DPA expands dynamic range

• CORE by DPA sounds better

If you are purchasing this lav with a TA5 or Lemo connector, we will modify the mic in house, and will take 7-10 days to ship. If you order it pigtailed (unterminated), or with a microdot connector, it will ship immediately if in stock. When ordering with the microdot connector, be sure you order the correct DPA microdot adapter to interface with your transmitter or sound system.

* For Zaxcom transmitters, the DPA 4063 (built for operating with lower supply voltage) is recommended.

DPA miniature mic nomenclature guide:

4060 - High Sensitivity
4061 - Low Sensitivity
4062 - Extra Low Sensitivity
4063 - Low Sensitivity Low DC (for Zaxcom transmitters)
4071 - Low Cut, Presence Boost

Directional characteristics	Omnidirectional
Principle of operation	Pressure
Cartridge type	Pre-polarized condenser element with vertical diaphragm
Frequency Range, ± 2 dB	Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz.
Sensitivity, nominal, ±3 dB at 1 kHz	20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level A-weighted	Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equiv. noise level ITU-R BS.468-4	Typ. 35 dB (max. 38 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL)	71 dB(A)
Total harmonic distortion (THD) - Legacy Total harmonic distortion (THD) - CORE	< 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine < 1 % THD up to 129 dB SPL peak
Dynamic range - Legacy Dynamic range - CORE	Typ. 100 dB Typ. 106 dB
Max. SPL, peak before clipping	134 dB
Output impedance	30 - 40 ohm
Cable drive capability	Up to 300 m (984 ft)
Power supply	For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Connector	MicroDot
Color	Black, beige, brown or white
Microphone weight	7.5 g (0.26 oz) incl. cable and MicroDot connector
Microphone diameter	5.4 mm (0.21 in)
Microphone length	12.7 mm (0.5 in)
Cable length	1.8 m (5.9 ft)
Polarity	Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range	-40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH)	Up to 90%