Browse brands

Zaxcom - ZMT3

Zaxcom - ZMT3
Zaxcom - ZMT3 Zaxcom - ZMT3 Zaxcom - ZMT3 Zaxcom - ZMT3 Zaxcom - ZMT3
Product Code: ZMT3
Sales SKU: ZAX ZMT3
$1,775.00

Available Options


* Zaxcom Blocks 3.5 or 3.6:

Qty:   - OR - Add to Wish List

* BATTERIES AND CHARGER ARE NOT INCLUDED

The ZMT3 is an ultra small bodypack transmitter filled with Zaxcom's Emmy Award winning Digital Recording Wireless features like NeverClip™, PowerRoll™ and ZaxNet remote control. This tiny unit will surely open the door to new ways of recording sound for television, sports, theatre and feature films.

The ZMT3 is a wide-band transmitter featuring Zaxcom's High Density (ZHD) Modulation. The ZMT3 transmitters are also capable of running all existing mono Zaxcom modulations maintaining compatibility with all Zaxcom receivers. ZHD modulation conforms to all currently proposed FCC regulations for spectrally efficient wireless transmission.

Small and durable, it's housed in a high strength, impact resistant nylon polymer casing with rounded edges, machined metal and rubber gaskets. ZMT runs cool, the combination of the nylon composite case and its power efficiency make the heat transfer practically non existent.

The ZMT3 works with ZaxNet, Zaxcom’s 2.4-GHz RF network that distributes remote control commands, timecode and IFB audio. With ZaxNet, one can remotely control transmitter settings such as gain, frequency channel selection, transport controls and output power levels. The ZMT3 also sends a Quality Control audio signal over ZaxNet, so when miking someone you don’t have to go to the cart to hear how it sounds, you can use an ERX to listen to the mic right on the spot.

The ZMT3 can be ordered in one of two configurations:
ZMT3.5 - covering blocks 20 through 23 (512-614 MHz)
ZMT3.6 - covering blocks 23 through 26 (596 – 698 MHz)

 

Transmitter

RF Modulation

Proprietary Digital Method

ZMT3.5 RF Frequency Range

512 - 614 MHz

ZMT3.6 RF Frequency Range

596 - 698 MHz

RF Frequency Step

100 KHz

RF Bandwidth in ZHD48 mode

50 KHz

RF Bandwidth in ZHD96 mode

100 KHz

RF Bandwidthin XR mode

200 KHz

Channel Separation in ZHD48 mode

as close as 100 KHz (receiver dependent)

Channel Separation in ZHD96 mode

as close as 200 KHz

Channel Separation in XR mode

400 KHz

Antenna Connector

50 Ω SSMA Female

Emission Designator

180 KV2E, 100 KV2E, 50 KV2E

FCC Part

74.861


Transmitter Audio

Dynamic Range

128 dB

Distortion

0.002%

Frequency Response

Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz

High Pass Filter

Off or 30 to 220 Hz, Steps: 10 (6 dB Per Octave)

Mic Power

3.3 VDC

Mic Connector

3-Pin Micro LEMO

Input Range

-60 to -30 dBu

Mic Impedance

6.8 k Ω

ADC Bit-Depth

24 Bits

ADC Sampling-Rate

48 kHz


Timecode Reader / Generator

Timecode output

3-Pin Micro LEMO

Clock Accuracy

1.54PPM (1 Frame Out in 6 Hours)

Timecode Type

SMPTE

Timecode Frame Rates

23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF

 


Internal Recording

Media

MicroSD Card (Flash Memory)

File Format

.ZAX / Converts to BWAV or MP3


2.4 GHz Receiver

RF Frequency Range

2.403 to 2.475 GHz

RF Modulation

Digital Spread Spectrum

RF Frequency Step

0.001 GHz (1 MHz)

RF Bandwidth

1 MHz

Channel Separation

2 MHz

Sensitivity

-96 dBm


Physical

Weight

2.2 oz with Battery

Dimensions

(H x W x D)

2.2” x 1.6” x .55”

Display

Graphic OLED


Power

Power Output

25 / 50 / 75 mW - Software Selectable

Battery Type

NP-50

Battery Life

Up to 5.5 Hours

Copyright © 2017 Audio Department.

Web development byCCSINTERACTIVE .